Scania XT Pack 2.4 1.61-1.62

And the remaining dot is for the custom license plate. Leave this off to allow the autogen license plates. NOTE: Kast’s chassis has messed with the master locator for license plates and autogen plates do not work, I can’t fix that and Kast apparently doesn’t want to.

What’s new in 2.4:

– Update for 1.61 and the PGRS/PGRS Fix mod.
– Gray and gloss lower front masks for the XT bumper
– Removed the definitions for Sogard’s lowdeck fenders. For now, this will be available on regular chassis only.
– Full support on the PGRS for the 2019 fenders with sensors.
– XT engine badges currently only available when using the “XT” (matte black) ribs due to problems loading the parts with their textures in Blender

What’s new in 2.3:

– Interim Update for 1.57 and Eugene’s PGRS 2.7, to be replaced soonish.
– Some of the ribs currently lack the locators for the badges. An alternate way of doing the badges is under consideration.
– To install the XT parts, choose your front mask, grille and rib options first, then apply the XT Front bumper. If you change which parts you’re using you need to re-apply the bumper again to get rid of the excess front grille parts.

What’s new in 2.2.3:

– Fixed missing texture on gray lower front mask

What’s new in 2.2.2:

– Fixed missing texture on “Standard” front grille ribs

What’s new in 2.2.1:

– Fixed missing or weird engine badges. Changed prices of badges to create rudimentary sorting.
– Fixed some glitches in included paint jobs due to no longer using XT-specific front masks and ribs. Not entirely fixed, don’t use painted ribs with the included paint jobs.

What’s new in 2.2:

– Engine badges for all engines except the S ### scheme have been made or re-made. I kept the old S 650 and S730 badges, but everything else has been redone. Thank you to Galimim for allowing me to use some of his work for that.
– A new bull bar, the “Goliath XT”, has been added, in four color options. It’s basically the stock Goliath reshaped to look more like the Trux OFFROAD B24-6, with some additional accessory slots to allow different ways to mount your lights. LED bar friendly locators have been added as well.

What’s new in 2.1:
– Restored the mistakenly deleted F. Kelleher Scania R skin definitions.
– Fixed some issues with the “XT Paint” bumper (wrong UVs). The template provided will now work properly.
– Removed extraneous definition files. No more “XT” front masks, grilles and front mask ribs, they’re not required.
– Model files for all variants of front mask ribs overwritten with ones compatible with the XT badges. This includes some versions available in Eugene’s mod.
– One set of matte black XT-specific ribs remain for compatibility reasons, in case you don’t use Eugene’s mod. It’s only available if a version of the XT bumper is selected.
– Gloss black lower front mask for the XT bumper added.
– Removed definition files pointing to Mighty Griffin-specific parts (Plastic Gray bumpers). After switching from the XT bumper to any of the Plastic Gray bumpers, there may be gaps where the front mask/ribs/grilles should be – reapply your desired front mask/ribs/grilles to get rid of the gaps.
– If you select a new upper front mask, grille, or front mask rib color while the XT bumper is equipped, there will be a gap. Reapply the lower front mask and grille; it will only show you XT-specific options. Doing either will remove the extra rib in the lower grille.
– As no definitions are included for the upper front masks, ribs, or grilles, what options you have available depends on whether you have Mighty Griffin (no paint mask without it) or Eugene’s Scania PGRS (no P, G, gloss black mask or dark gray ribs without this). Both are recommended but not required.
– Foglights don’t work. I didn’t specifically disable them, but as foglights are straight up illegal to drive with in combination with any other lights and SCS does not have a fog light toggle, I’m not going to put any effort into making them work again. Sorry folks, they’re for decoration, just like the ones on the SCS trucks.